How can I remove specific rules from iptables? [closed]

by

I am hosting special HTTP and HTTPS services on the ports 8006 and 8007 respectively. I use iptables to “activate” the server; i.e. to route the incoming HTTP and HTTPS ports:

iptables -A INPUT -i eth0 -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 443 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 8006 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 8007 -j ACCEPT
iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 8006 
iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 443 -j REDIRECT --to-port 8007  
iptables -A OUTPUT -t nat -d 127.0.0.1 -p tcp --dport 80 -j REDIRECT --to-ports 8006
iptables -A OUTPUT -t nat -d 127.0.0.1 -p tcp --dport 443 -j REDIRECT --to-ports 8007

This works like a charm. However I would like to create another script that disables my server again; i.e. restore iptables to the state it was in before running the lines above. However I am having a hard time figuring out the syntax to remove these rules. The only thing that seems to work is a complete flush:

iptables -F
iptables -X
iptables -t nat -F
iptables -t nat -X
iptables -t mangle -F
iptables -t mangle -X
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT

But that will also delete other iptables rules which is undesired.

8 Answers
8

Leave a Comment